Deployment Requirements
This section explains the deployment requirements for the RN150 Virtual Appliance.
The RN150 is a Debian/GNU Linux Virtual Appliance. It is deployed on either VMware ESXi (6.5 or later) or Microsoft Hyper-V (Server 2019 or later).
• | Resource Requirements |
• | Communication Protocols |
• | Required Credentials and Parameters |
The following are the default resource requirements.
Requirement |
Description |
|||||||||||||||
RAM |
8 GB of RAM |
|||||||||||||||
vCPUs |
2 vCPUs |
|||||||||||||||
Hard drive space |
50 GB Hard drive (Thin Provisioned) |
|||||||||||||||
Internet access (TCP Port 443) |
TCP Port 443 outbound to the following:
|
|||||||||||||||
Internet access (UDP Port 123) |
UDP Port 123 outbound to the following:
If this requirement cannot be met, due to, for example, requiring a proxy, a local NTP server can be specified instead, or NTP can be disabled which will automatically enable hypervisor host timesync. See Appliance NTP Support for details. |
The RN150 uses the following protocols (ports) to access the network. These protocols/ports should be permitted between the RN150 and all local resources (servers, routers, etc) to be included in the discovery.
Protocol |
Port |
Source |
Destination |
Usage |
TCP |
443 |
RN150 |
Internet |
For communication from the RN150 to the RISC Networks Cloud Orchestration layer |
TCP |
443 |
RN150 |
FlexDeploy |
For uploading inventory/performance data and synchronizing licensing Note:This communication protocol is not applicable to SaaS engagements. |
UDP |
123 |
RN150 |
Internet |
For synchronizing appliance time via NTP |
ICMP |
— |
RN150 |
Local Networks |
By the RN150 for base discovery for available devices |
TCP |
135 |
RN150 |
Local Networks |
By the RN150 to obtain WMI information from Windows hosts discovered |
TCP |
1025-5000 |
RN150 |
Local Networks |
RPC Dynamic Port Allocation used for WMI communication (Default for Windows Server 2003 / XP and older) |
TCP |
49152-65535 |
RN150 |
Local Networks |
RPC Dynamic Port Allocation used for WMI communication (Default for Windows Server 2008 / Vista and newer) |
TCP |
80 |
RN150 |
Local Networks |
By the RN150 to obtain HTTP |
UDP |
161 |
RN150 |
Local Networks |
Used for gathering SNMP information from devices on the Network |
TCP |
443 |
RN150 |
Local Networks |
Used for gathering VMware guest information directly from vCenter |
TCP |
22 |
RN150 |
Local Networks |
By the RN150 to collect from Linux/UNIX servers over the SSH protocol |
TCP |
* |
RN150 |
Local Networks |
Collection from Linux/UNIX servers via SSH user supplied non-standard TCP ports |
TCP |
445 |
RN150 |
Local Networks |
SMB over TCP/IP used for application socket collection |
TCP |
139 |
RN150 |
Local Networks |
SMB over NetBIOS used for application socket collection |
TCP |
8443 |
RN150 |
Local Networks |
Used for discovering Tomcat and Cisco UC servers* |
TCP |
62078 |
RN150 |
Local Networks |
Used for discovering Apple products (iPhone) – iTunes sync over air port |
TCP |
22 |
RN150 |
Local Networks |
For command line discovery of Cisco Switches and Routers |
TCP |
1433** |
RN150 |
Local Networks |
For MSSQL database collection only |
TCP |
1521** |
RN150 |
Local Networks |
For Oracle database collection only |
TCP |
3306** |
RN150 |
Local Networks |
For MySQL database collection only |
Note:Double asterisks (**) means that port or other non-standard ports as required for database connectivity.
Required Credentials and Parameters
The following are required credentials and parameters:
Credential/Parameter |
Description |
||||||||||||||||||||||||
IP Subnets |
IP Subnets that the client would like to scan
|
||||||||||||||||||||||||
Administrators |
Windows Domain Administrator or Local Administrator (workgroup servers only) credentials
|
||||||||||||||||||||||||
SSH User Account |
SSH user account with sudo privileges
Note:For more information, see SSH Collection Module. |
||||||||||||||||||||||||
SNMP Read-Only Credentials |
|
||||||||||||||||||||||||
VMware Credentials |
Read-only access to vCenter or root access to ESX hosts directly |
||||||||||||||||||||||||
Database credentials |
IP/SIDs of database hosts Note:For more information, see Database Module. |