Configuring FlexNet Manager for Engineering Applications with the Test Certificate

To configure FlexNet Manager for Engineering Applications with the test certificate you just generated:

1.

Stop FlexNet Manager for Engineering Applications.

2.

Copy the test keystore file that you just generated, keystore, to a location accessible from, but outside, the FlexNet Manager for Engineering Applications installation.

3.

To reconfigure FlexNet Manager for Engineering Applications to use this new test keystore, navigate to the flexnet_agent_install_dir and click on the AgentConfiguration batch file. The FlexNet Manager for Engineering Applications Configurator appears.

4.

On the first pane of the Configurator (Step 1), change the value in the Broker Protocol field to SSL and select the Show Advanced Settings check box.

5.

Click Next three times to advance to the fourth pane (Step 4).

6.

Modify the SSL Keystore Location setting to match the location of the test keystore.

7.

In the SSL Keystore Password field, enter and confirm the keystore password for the certificate. The default password for the bundled keystore is flexnet.

8.

Click Finish. When the Configurator window closes, the site directory is re-created to reflect the new configuration settings.

9.

Restart FlexNet Manager for Engineering Applications.