Configuring the location of the keystore

To configure the location of the keystore

1.

Stop FlexNet Manager for Engineering Applications Admin and Reporting.

2.

To reconfigure FlexNet Manager for Engineering Applications Admin to use this new test keystore:

a.

Open a Command Prompt window and change to the admin_install_directory.

b.

Type the command: flexnet site. The Admin Configurator appears.

c.

On the first pane of the Configurator, select the Show Advanced Settings check box, and then click Next twice to advance to the third pane. Edit the settings:

•

If you want the port to be something other than 8443, change the HTTPS Port.

•

Modify the SSL Keystore Location setting to match the location of the test keystore.

•

In the SSL Keystore Password field, enter and confirm the keystore password for the certificate. The default password for the bundled keystore is flexnet.

d.

Click Next through to the last pane, and then click Finish. When the Configurator window closes, the site directory is re-created to reflect the new configuration settings.

3.

Start FlexNet Manager for Engineering Applications Admin and Reporting.

a.

To start Admin from the command line, navigate to the Admin installation location, then type the command: flexnet start