Devices Listings Property Reference

The following table describes properties (listed alphabetically) displayed in columns on the following Devices pages:

•

Unmanaged Devices

•

All Discovered Devices

IT Asset Management groups the device properties into the following two categories. The category name appears on the top of the column heading when you drag a property from the Column Chooser. Properties that belong to the same category appear under single category title.

•

Discovered device properties—This category contains the properties that describe one or more attributes of a discovered device. See Discovered Device Properties.

•

Rule results—This category contains the properties that describe the status information for one or more actions performed on a device as a part of the discovery and inventory rule. See Rule Results.

Note:Most lists in IT Asset Management only show a selection of the properties in the underlying database. Some columns are displayed by default and others can be displayed using the column chooser control, including any custom properties that you have added. For information on using the column chooser, see Managing Columns in a Table.

Discovered Device Properties

This section lists the basic properties of a discovered device.

Discovered Device Properties in Device Listings

Property

Description

Agent installed

Indicates whether the discovered computer has the Inventory Agent installed on it. Value is set to Yes:

•

Automatically when the device has been adopted within the last 30 days (an initial grace period before inventory uploads start)

•

Automatically each time that FlexNet inventory is received from the device in cycles of less than 30 days, and the Inventory Agent is recognized within that inventory

•

Manually, if you are creating a discovered device record.If the 30-day cycle is exceeded, the value is set to No.

Selectable in the Advanced tab of the discovered device properties.

Discovered

A Yes indicates that the device was first identified in a discovery process (either remotely from an inventory beacon, or locally when the installed Inventory Agent found Oracle on the device). A No indicates that the discovery record was 'back-generated' after the device was found in collected inventory.

The discovery and inventory processes generate the value of this field.

Discovered by

Identifies the beacon that discovered this device.

The discovery and inventory process generates the value of this field.

DNS full name

The fully qualified name of the discovered computing asset in the Domain Name System.

Editable in the General tab in the discovered device properties.

Domain name

The name of the domain to which the computing device belongs.

Tip:Displays flexera.com if this is a dummy device record created for imports through your connector to SaaS Management.

Editable in the General tab of the discovered device properties.

First discovered

Specifies the date and time when the discovery process discovered this device.

The discovery and inventory process generates the value of this field.

Inventoried

Indicates that the inventory information has been collected for this device, and the device appears in the All Inventory list. IT Asset Management may have collected this information through an agent or through discovery and inventory rules.

The discovery and inventory process generates the value of this field.

IP address

The IPv4 address of the discovered device. For discovered devices with multiple IP addresses (for example, those with multiple network cards), only the first validly-formed IP address displays. The IP address may be blank for reasons like these:

•

The first (or only) IP address returned was in the IPv6 address family (and these addresses are not included)

•

The device was discovered by NetBIOS queries, or through a TNSNames.ora file, that provided only a device name, and the DNS look-up did not return an IPv4 address for this device.

Editable in the General tab of the discovered device properties.

Last discovered

Specifies the date and time when this device was last discovered by the discovery process. A blank value for this field indicates that the device has been discovered by a third-party inventory collection tool, and not by discovery and inventory rules or Inventory Agent.

The discovery and inventory process generates the value of this field.

Last inventory date

The date when the last inventory information was collected by the Last inventory source for this inventory device.

The inventory process generates the value of this field.

MAC address

The Media Access Control (MAC) address of the inventory device. If a device has multiple network interface cards, this field displays a comma-separated list of MAC addresses.

Editable in the General tab of the inventory device properties (for manually-created records).

Name

The name of the computing device.

Editable in the General tab in the discovered device properties. This field is not editable in the Raw Software Usage page.

Note:It is best practice to leave names unchanged for records created automatically from discovery or inventory. As the name is used to identify the device, changing the name effectively creates a separate device record, and the old one is recreated at the next import.

Operating system

The operating system running on this device.

The discovery and inventory process generates the value of this field.

Note:Under certain conditions, this value may be blank. For more information, see Conditions When Operating System Value of Device is Blank.

Oracle DB listeners

Lists the names of the Oracle listeners installed on this device.

The discovery and inventory process generates the value of this field.

Oracle DB services

Lists the names of the Oracle services installed on this device.

The discovery and inventory process generates the value of this field.

Site

Specifies the name of the site or subnet to which this device has been allocated, based on its reported IP address. If the reported IP address does not place the computer in any defined site, the site is reported as Unrecognized.

The discovery and inventory process generates the value of this field.

SQL Server

Indicates whether the computer is running SQL Server database.

Editable in the Databases tab of the discovered device properties.

VDI

Indicates whether the device is a virtual machine hosted in VDI.

The discovery and inventory process generates the value of this field.

VDI broker

Indicates whether the device is running a Citrix Broker service.

The discovery and inventory process generates the value of this field.

VDI template

Identifies the VDI template (Catalog in Citrix terminology) from which the virtual desktop instance accessed remotely from this inventory device, was spawned. The value of this field appears only when this device has been used as an end-point to access a remote desktop.

The discovery and inventory process generates the value of this field.

Virtual parent

Specifies whether the device is a virtual parent.

The discovery and inventory process generates the value of this field.

Virtualization host

The value of this field is automatically generated by the discovery process.

Virtualization port

Specifies the virtualization port number.

Editable in the Advanced tab of the discovered device properties.

Rule Results

This section lists the status of discovery and inventory rule execution on a device.

Rule Results

Property

Description

Adoption

Displays the status of adoption for this device. This field indicates the details of success or failure while adopting the discovered device. This field can have any of the following values:

•

Agent already installed—The discovery and inventory process performed no adoption because Inventory Agent has been already installed on this device

•

Completed—The adoption completed successfully

•

Failed—The adoption failed

•

Not configured—The discovery and inventory process performed no adoption because the discovery and inventory rule is not configured to gather inventory

•

Not in beacon's subnet—No inventory gathering performed because the device is outside the beacon's subnet

•

Not specified in rule's target—No inventory gathering performed as the device is outside the underlying discovery and inventory rule's target

•

Not targeted—No inventory gathering was performed as the device was specifically excluded in the underlying discovery and inventory rule's target

•

Unknown IP address—No inventory gathering performed as the IP address of the device is unknown.

The discovery and inventory process generates the value of this field.

Adoption date

Displays the date and time when IT Asset Management adopted this device.

The discovery and inventory process generates the value of this field.

Citrix XenDesktop discovery

Specifies whether the discovery and inventory process has discovered Citrix Virtual Desktops (previously Citrix XenDesktop) on this device, through remote execution. This field may have any of the following values:

•

Discovered successfully—Virtual Desktops is discovered.

•

Discovery completed with errors—The discovery process completed with some errors. You can check the Rules page for troubleshooting information.

•

Exempted—No attempt was made to identify Virtual Desktops on this device because it was discovered through a TNSNames.ora file and is therefore assumed to be an Oracle Database server.

•

Not configured—The discovery and inventory rule is not configured to discover Virtual Desktops.

•

Not discovered—Virtual Desktops is not discovered.

The discovery and inventory process generates the value of this field.

Citrix XenDesktop discovery date

The date and time when IT Asset Management discovered Citrix Virtual Desktops (previously Citrix XenDesktop) on this device.

Not editable for existing devices.

Citrix XenDesktop inventory

Specifies whether the discovery and inventory process has collected Citrix Virtual Desktops (previously Citrix XenDesktop) inventory for this device, through remote execution. This field may have any of the following values:

•

Completed—Virtual Desktops inventory collected successfully

•

Discovery not enabled—Virtual Desktops discovery disabled in the rule

•

Exempted—No attempt was made to collect Virtual Desktops inventory, because the device is discovered through a TNSNames.ora file and is therefore assumed to be an Oracle Database server

•

Failed—Virtual Desktops inventory collection failed

•

Local agent—The locally-installed Inventory Agent gathers inventory

•

Not configured—The discovery and inventory rule is not configured to gather inventory for Virtual Desktops

•

Not discovered—Virtual Desktops is not discovered on this device

•

Not in beacon's subnet—No inventory gathering performed because the device is outside the beacon's subnet

•

Not specified in rule's target—No inventory gathering performed as the device is outside the underlying discovery and inventory rule's target

•

Unknown IP address—No inventory gathering performed as the IP address of the device is unknown.

The discovery and inventory process generates the value of this field.

Citrix XenDesktop inventory date

The date and time when IT Asset Management collected Citrix Virtual Desktops (previously Citrix XenDesktop) inventory for this device.

The value of this field is automatically generated by the discovery and inventory process.

MS Hyper-V discovery

Specifies whether the discovery and inventory process has discovered Microsoft Hyper-V on this device, through remote execution. This field may have any of the following values:

•

Discovered successfully—Microsoft Hyper-V is discovered.

•

Discovery completed with errors—The discovery process completed with some errors. You can check the Rules page for troubleshooting information.

•

Exempted—No attempt was made to discover Microsoft Hyper-V on this device because it was discovered through a TNSNames.ora file, and is therefore assumed to be an Oracle Database server.

•

Not configured—The discovery and inventory rule is not configured to discover Microsoft Hyper-V.

•

Not discovered—Microsoft Hyper-V is not discovered.

The discovery and inventory process generates the value of this field.

MS Hyper-V discovery date

Specifies the date and time when IT Asset Management discovered MS Hyper-V on this device.

Not editable for existing devices.

MS Hyper-V inventory

Specifies whether the discovery and inventory process has collected Microsoft Hyper-V inventory for this device, through remote execution. This field may have any of the following values:

•

Completed—Microsoft Hyper-V inventory collected successfully

•

Discovery not enabled—Microsoft Hyper-V discovery disabled in the rule

•

Exempted—No attempt was made to collect Microsoft Hyper-Vinventory, because the device is discovered through a TNSNames.ora file and is therefore assumed to be an Oracle Database server

•

Failed—Microsoft Hyper-V inventory collection failed

•

Local agent—The locally-installed Inventory Agent gathers inventory

•

Not configured—The discovery and inventory rule is not configured to gather inventory for Microsoft Hyper-V

•

Not discovered—Microsoft Hyper-V is not discovered on this device

•

Not in beacon's subnet—No inventory gathering performed because the device is outside the beacon's subnet

•

Not specified in rule's target—No inventory gathering performed as the device is outside the underlying discovery and inventory rule's target

•

Unknown IP address—No inventory gathering performed as the IP address of the device is unknown.

The discovery and inventory process generates the value of this field.

MS Hyper-V inventory date

Specifies the date and time when IT Asset Management collected MS Hyper-V inventory for this device.

The value of this field is automatically generated by the discovery and inventory process.

MS SQL discovery

Specifies whether the discovery and inventory process has discovered MS SQL on this device, through remote execution. This field may have any of the following values:

•

Discovered successfully—MS SQL is discovered.

•

Discovery completed with errors—The discovery process completed with some errors. You can check the Rules page for troubleshooting information.

•

Exempted—No attempt was made to identify MS SQL on this device because it was discovered through a TNSNames.ora file and is therefore assumed to be an Oracle Database server.

•

Not configured—The discovery and inventory rule is not configured to discover MS SQL.

•

Not discovered—MS SQLis not discovered.

The discovery and inventory process generates the value of this field.

MS SQL discovery date

Specifies the date and time when IT Asset Management discovered MS SQL on this device.

Not editable for existing devices.

MS SQL inventory

Specifies whether the discovery and inventory process has collected MS SQL inventory for this device, through remote execution. This field may have any of the following values:

•

Completed—MS SQL inventory collected successfully

•

Discovery not enabled—MS SQL discovery disabled in the rule

•

Exempted—No attempt was made to collect MS SQL inventory, because the device is discovered through a TNSNames.ora file and is therefore assumed to be an Oracle Database server

•

Failed—MS SQL inventory collection failed

•

Local agent—The locally-installed Inventory Agent gathers inventory

•

Not configured—The discovery and inventory rule is not configured to gather inventory for MS SQL

•

Not discovered—MS SQLis not discovered on this device

•

Not in beacon's subnet—No inventory gathering performed because the device is outside the beacon's subnet

•

Not specified in rule's target—No inventory gathering performed as the device is outside the underlying discovery and inventory rule's target

•

Unknown IP address—No inventory gathering performed as the IP address of the device is unknown.

The discovery and inventory process generates the value of this field.

MS SQL inventory date

Specifies the date and time when IT Asset Management collected MS SQL inventory for this device.

The value of this field is automatically generated by the discovery and inventory process.

Oracle DB discovery

Specifies whether the discovery process has discovered Oracle Database on this device, through remote execution. This field may have any of the following values:

•

Discovered successfully—Oracle database is discovered.

•

Discovery completed with errors—The discovery process completed with some errors. You can check the Rules page for troubleshooting information.

•

Exempted—The discovery process did not attempt to identify Oracle Database, because the device was identified through a TNSNames.ora file, and is therefore assumed to be an active Oracle Database server with further discovery not required.

•

Not configured—The discovery and inventory rule is not configured to discover Oracle DB.

•

Not discovered—Oracle DB is not discovered.

The discovery and inventory process generates the value of this field.

Oracle DB discovery date

Specifies the date and time when IT Asset Management discovered Oracle database on this device.

Not editable for existing devices.

Oracle DB inventory

Specifies whether the inventory beacon has collected Oracle Database inventory for this device, through remote execution. This field may have any of the following values:

•

Completed—Oracle Database inventory collected successfully

•

Discovery not enabled—Oracle Database discovery disabled in the rule

•

Failed—Oracle Database inventory collection failed

•

Local agent—The locally-installed Inventory Agent gathers inventory

•

Not configured—The discovery and inventory rule is not configured to gather inventory for Oracle Database

•

Not discovered—Oracle Database is not discovered on this device

•

Not in beacon's subnet—No inventory gathering performed because the device is outside the beacon's subnet

•

Not specified in rule's target—No inventory gathering performed as the device is outside the underlying discovery and inventory rule's target

•

Unknown IP address—No inventory gathering performed as the IP address of the device is unknown.

The discovery and inventory process generates the value of this field.

Oracle DB inventory date

Specifies the date and time when IT Asset Management collected Oracle database inventory for this device.

The value of this field is automatically generated by the discovery and inventory process.

Oracle VM discovery

Specifies whether the discovery and inventory process has discovered Oracle VM on this device, through remote execution. This field may have any of the following values:

•

Discovered successfully—Oracle VM is discovered.

•

Discovery completed with errors—The discovery process completed with some errors. You can check the Rules page for troubleshooting information.

•

Exempted—No attempt was made to identify Oracle VM on this device because it was discovered through a TNSNames.ora file and is therefore assumed to be an Oracle Database server.

•

Not configured—The discovery and inventory rule is not configured to discover Oracle VM.

•

Not discovered—Oracle VM is not discovered.

The discovery and inventory process generates the value of this field.

Oracle VM discovery date

Specifies the date and time when IT Asset Management discovered Oracle VM on this device.

Not editable for existing devices.

Oracle VM inventory

Specifies whether the discovery and inventory process has collected Oracle VM inventory for this device, through remote execution. This field may have any of the following values:

•

Completed—Oracle VM inventory collected successfully

•

Discovery not enabled—Oracle VM discovery disabled in the rule

•

Exempted—The device was exempted from inventory collection for Oracle VMs because it was identified in a TNSNames.ora file, and is assumed to be an Oracle Database server.

•

Failed—Oracle VM inventory collection failed

•

Local agent—The locally-installed Inventory Agent gathers inventory

•

Not configured—The discovery and inventory rule is not configured to gather inventory for Oracle VM

•

Not discovered—Oracle VM is not discovered on this device

•

Not in beacon's subnet—No inventory gathering performed because the device is outside the beacon's subnet

•

Not specified in rule's target—No inventory gathering performed as the device is outside the underlying discovery and inventory rule's target

•

Unknown IP address—No inventory gathering performed as the IP address of the device is unknown.

The discovery and inventory process generates the value of this field.

Oracle VM inventory date

Specifies the date and time when IT Asset Management collected Oracle VM inventory for this device.

The value of this field is automatically generated by the discovery and inventory process.

Remote inventory

Indicates that the inventory information has been collected for this device through discovery and inventory rules. This field may have any of the following values:

•

Completed—Remove inventory collected successfully

•

Discovery not enabled—Remote discovery disabled in the rule

•

Exempted—The device was exempted from general remote inventory gathering because it was identified through a TNSNames.ora file, and is therefore assumed to be an Oracle server

•

Failed—Remote inventory collection failed

•

Local agent—The locally-installed Inventory Agent gathers inventory

•

Not configured—The discovery and inventory rule is not configured to gather inventory for remote devices.

•

Not discovered—Remote inventory is not discovered on this device

•

Not in beacon's subnet—No inventory gathering performed because the device is outside the beacon's subnet

•

Not specified in rule's target—No inventory gathering performed as the device is outside the underlying discovery and inventory rule's target

•

Unknown IP address—No inventory gathering performed as the IP address of the device is unknown.

The discovery and inventory process generates the value of this field.

Remote inventory date

Specifies the date and time when IT Asset Management collected inventory information for this device through discovery and inventory rules.

The discovery and inventory process generates the value of this field.

VMware discovery

Specifies whether the discovery and inventory process has discovered VMware on this device, through remote execution. This field may have any of the following values:

•

Discovered successfully—VMware is discovered.

•

Discovery completed with errors—The discovery process completed with some errors. You can check the Rules page for troubleshooting information.

•

Exempted—The discovery process did not look for VMware software because the device was identified in a TNSNames.ora file, and is therefore assumed to be an Oracle server.

•

Not configured—The discovery and inventory rule is not configured to discover VMware.

•

Not discovered—VMware is not discovered.

The discovery and inventory process generates the value of this field.

VMware discovery date

Specifies the date and time when IT Asset Management discovered VMware on this device.

The discovery and inventory process generates the value of this field.

VMware inventory

Specifies whether the discovery and inventory process has collected VMware inventory for this device, through remote execution. This field may have any of the following values:

•

Completed—VMware inventory collected successfully

•

Discovery not enabled—VMware discovery disabled in the rule

•

Exempted—No attempt was made to collect VMware inventory from this device because it was discovered through a TNSNames.ora file, and is therefore assumed to be an Oracle Database server

•

Failed—VMware inventory collection failed

•

Local agent—The locally-installed Inventory Agent gathers inventory

•

Not configured—The discovery and inventory rule is not configured to gather inventory for VMware

•

Not discovered—VMware is not discovered on this device

•

Not in beacon's subnet—No inventory gathering performed because the device is outside the beacon's subnet

•

Not specified in rule's target—No inventory gathering performed as the device is outside the underlying discovery and inventory rule's target

•

Unknown IP address—No inventory gathering performed as the IP address of the device is unknown.

The discovery and inventory process generates the value of this field.

VMware inventory date

Specifies the date and time when IT Asset Management collected VMware inventory for this device.

The discovery and inventory process generates the value of this field.

Conditions When Operating System Value of Device is Blank

The Operating system field may be blank under the following conditions:

•

The device is recently discovered. The operating system can only occasionally be populated during first discovery, and is often backfilled once inventory is returned for this device.

•

The device is a VM host that is a hardware frame that may not be running its own operating system. In this case, the computer Name field is set to a serial number associated with the hardware (because, without an operating system, there is no host name). In fact, no inventory of any kind is possible without an operating system, so IT Asset Management synthesizes the VM host record from common data reported by its guest VMs. The virtual machines in these cases may typically be partitions like:

•

LPARs running on IBM PowerPC servers

•

Solaris zones on either x86 or SPARC architectures

•

nPar or vPar partitions running on HP Integrity servers.